Three-dimensional facial soft-tissue changes after surgical orthodontics in different vertical facial types of skeletal Class III malocclusion: A retrospective study.

The study compared the soft-tissue response to hard-tissue movement among different Class III vertical facial types after orthognathic surgery (OGS). The study included 90 consecutive adult patients with skeletal Class III malocclusion who underwent two-jaw OGS. Patients were divided into three groups (high, medium, and low angle) based on the presurgical Frankfort-mandibular plane angle. Cone-beam computerized tomographs were taken before surgery and after debonding. Soft- and hard-tissue linear and angular measurements were performed using three-dimensional reconstruction images. One-way analysis of variance was used for intergroup comparisons. Soft tissue tended to respond more to hard-tissue movement in the lower lip area in patients with low angle (mean = 0.089, SD = 0.047, p = 0.023), whereas no significant difference was observed for other sites. Consistently, L1/Li thickness increased most significantly in the high-angle group (mean = 1.98, SD = 2.14, p = 0.0001), and B/Si thickness decreased most significantly after surgery (mean = 2.16, SD = 2.68, p = 0.016). The findings suggest that the high-angle group had a higher chance of undergoing genioplasty to enhance chin contour. Different OGS plans should be considered for different Class III vertical facial types.

Influencing factors for the development of obstructive sleep apnea after orthognathic surgery in skeletal class III patients: A systematic review.

This systematic review aimed to investigate the factors that may contribute to the development of OSA after orthognathic surgery in patients with skeletal class III. Electronic searches of PubMed, Embase, Web of Science, and Cochrane databases were conducted up to December 10, 2022. In total, 277 studies were retrieved and screened according to the inclusion and exclusion criteria, and 14 were finally selected. All studies were of medium quality (moderate risk of bias). The occurrence of OSA after orthognathic surgery in patients with class III skeletal relationships depends on surgical factors and patient self-factors. Surgical factors include surgery type, amount of maxillary and mandibular movement, and the patient's postoperative swelling. Patient self-factors include weight, age, gender, and hypertrophy of the soft palate, tonsils, and tongue. According to information in the 14 selected articles, the incidences of OSA after Le Fort I impaction and BSSO setback, BSSO setback, and Le Fort I advancement and BSSO setback were 19.2%, 8.57%, and 0.7%, respectively, mostly accompanied with greater amounts of mandibular recession. However, no clear evidence exists to confirm that orthognathic surgery is a causative factor for postoperative sleep breathing disorders in patients with mandibular prognathism. The wider upper airway in patients with class III skeletal might be the reason for the rare occurrence of OSA after surgery. In addition, obesity and advanced age may lead to sleep apnea after orthognathic surgery. Obese patients should be advised to lose weight preoperatively.

The effect of tongue reduction for preventing adverse effects in patients undergoing class III orthognathic surgery: a three-dimensional comparative analysis.

OBJECTIVES: This study aims to evaluate the potential benefits of combining tongue reduction with mandibular setback surgery in patients undergoing class III orthognathic surgery. Specifically, we investigated whether this combined approach reduced the risk of surgical relapse, condylar resorption, and airway space reduction by mitigating tongue pressure on the mandible. MATERIAL AND METHODS: The study retrospectively enrolled patients who had undergone bilateral sagittal split ramus osteotomy (BSSRO) with at least 5 mm of setback and met the criteria of a body mass index > 20 kg/m2 and tongue volume > 100 mm3. The study included 20 patients with 10 in the tongue reduction group (TR, n = 10) and 10 in the BSSRO only group (SO, n = 10). RESULTS: The volumetric changes of the total airway space were significantly different between the TR and SO groups (p = 0.028). However, no significant differences were observed in the condylar resorption and postoperative relapse between the groups (p = 0.927 and 0.913, respectively). The difference between the resorption of the anterior and posterior segments of the condyle was also statistically insignificant (p = 0.826). Postoperative counterclockwise rotation of the proximal segment only demonstrated a significant correlation with postoperative relapse (p = 0.048). CONCLUSIONS: The reduction in tongue volume demonstrated a preventive effect on the reduction of the airway space after mandibular setback, although it did not yield statistical significance concerning surgical relapse and condylar volume. The counterclockwise rotation of the proximal segment might be responsible for the forward displacement of the distal segment and postoperative relapse. However, the clinical implications of this finding should be interpreted with caution owing to the limited sample size CLINICAL RELEVANCE: Tongue reduction could potentially serve as a preventive measure in preserving the airway space and might be beneficial in mitigating the risk of obstructive sleep apnea in patients with class III deformity.

Three-dimensional analysis of hard and soft tissue changes in skeletal class II patients with high mandibular plane angle undergoing surgery.

This study aimed to study 3-dimensional (3D) changes of hard and soft tissues of skeletal class II patients after 2-jaw surgery and genioplasty. 32 adult patients diagnosed with mandibular hypoplasia who underwent 2-jaw surgery of maxillary impaction, mandibular advancement and genioplasty were enrolled. Cone-beam computed tomography and 3D stereophotogrammetry was conducted 1 week before and 6 months after surgery. Dolphin imaging software was used to establish a 3D digitizing model and 3D measurement system. Paired t-test was performed to compare the values before and after surgery. Pearson's correlation test assessed the degree of correlations between hard and soft tissue change. The mean impaction of the maxilla was 2.600 ± 3.088 mm at A. The mean advancement of the mandible was 7.806 ± 2.647 mm at B. There was a significant upward and forward movement for most landmarks of the nose and lip, while a significant decrease in nasal tip height (lateral view), upper lip height, and upper and lower vermilion height. The nose's width was significantly increased. For maxillary, Sn, Ac-r, Ac-l, and Ls demonstrated a significant correlation with A and U1 in the anteroposterior axis. However, there were no significant correlations among them in the vertical axis. For mandibular, Li demonstrated a significant correlation with L1 in the anteroposterior axis specifically for the mandible. Notably, correlations between the landmarks of the chin's hard and soft tissues were observed across all axes. The utilization of 3-D analysis facilitated a quantitative comprehension of both hard and soft tissues, thereby furnishing valuable insights for the strategic formulation of orthognathic treatment plans targeting patients with skeletal class II conditions.

Soft-Tissue Response following Genioplasty Combined with Anterior Segmental Osteotomy.

BACKGROUND: The authors' main aim was to analyze soft-tissue response of the chin following genioplasty with anterior segmental osteotomy, which enables optimal surgical planning of genioplasty. METHODS: Sixty-two patients who underwent genioplasty with concomitant anterior segmental osteotomy were divided into three groups depending on the direction of pogonion (Pog) movement: G1 (without sagittal change), G2 (advancement genioplasty), and G3 (setback genioplasty). All genioplasties included height reduction. Hard- and soft-tissue measurements with cephalometry were performed at T1 (before surgery), T2 (after surgery), and T3 (after orthodontic treatment) for the analysis of sagittal and vertical changes. Correlation and regression analyses were conducted to analyze soft- to hard -tissue movement and soft-tissue thickness changes. RESULTS: During the T1 to T2 period, the horizontal soft- to hard-tissue ratio at Pog was 0.85 in G2 and 0.80 in G3, and the vertical ratio at menton (Me) was 0.9 for all groups. The correlation coefficients were 0.64 (G2) and 0.83 (G3) at Pog and 0.9 (all), 0.85 (G1), 0.95 (G3) at Me. There was no significant correlation between initial soft-tissue thickness and soft-tissue response ratio. During the T2 to T3 period, no significant relapses were observed, which demonstrates the stability of anterior segmental osteotomy combined genioplasty. CONCLUSIONS: Clinically and statistically significant soft-tissue responses were demonstrated at Pog and Me. The higher values in G3 in particular suggest that setback genioplasty with anterior segmental osteotomy is an effective treatment alternative to conventional two-jaw surgery in some patients with bimaxillary prognathism with macrogenia. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Thematic Analysis of Parental Experiences of Patients' Orthognathic Surgery.

Orthognathic surgery often requires extensive orthodontic preparation and a prolonged postoperative recovery that can be stressful for patients and their families. Parents are a primary source of support for patients; accordingly, a better understanding of the parents' experience of orthognathic surgery can help inform clinical care. Using a prospective cross-sectional qualitative study design, 4 focus groups (2 English and 2 Spanish; mean length 65 min) were held with parents of patients who had completed orthognathic surgery for class II/III malocclusion. Thematic content analysis of the group transcriptions was conducted. Participants were 10 mothers and 3 fathers of 12 children (50% with cleft lip/palate) ages 17 to 23 who completed LeFort I (41.7%), LeFort I with bilateral sagittal split osteotomy (BSSO; 41.7%), or BSSO (16.7%) within the prior 3 to 16 months. Themes fit within a chronological framework: (1) Preparing for Surgery included their larger health context, anticipating surgery, surgery preparation by team and family, and religious faith; (2) Challenges after Surgery consisted of complications, pain, frustration, nutritional challenges, parental anxiety, activity changes, sleep, breathing issues, swelling, and unanticipated aspects of surgery; and (3) Supports after Surgery were nutritional support, appreciation of medical team, postoperative improvements, appearance changes, communicating, supporting patient, and patient coping. Parents also offered advice for families and medical teams. Surgeons and other providers who are part of orthognathic surgical preparation can implement recommendations based on parental experiences to increase patient and family readiness for surgery by providing early education, assisting with advocacy, focusing on nutrition, and supporting coping.

Machine Learning Effectively Diagnoses Mandibular Deformity Using Three-Dimensional Landmarks.

BACKGROUND: Jaw deformity diagnosis requires objective tests. Current methods, like cephalometry, have limitations. However, recent studies have shown that machine learning can diagnose jaw deformities in two dimensions. Therefore, we hypothesized that a multilayer perceptron (MLP) could accurately diagnose jaw deformities in three dimensions (3D). PURPOSE: Examine the hypothesis by focusing on anomalous mandibular position. We aimed to: (1) create a machine learning model to diagnose mandibular retrognathism and prognathism; and (2) compare its performance with traditional cephalometric methods. STUDY DESIGN, SETTING, SAMPLE: An in-silico experiment on deidentified retrospective data. The study was conducted at the Houston Methodist Research Institute and Rensselaer Polytechnic Institute. Included were patient records with jaw deformities and preoperative 3D facial models. Patients with significant jaw asymmetry were excluded. PREDICTOR VARIABLES: The tests used to diagnose mandibular anteroposterior position are: (1) SNB angle; (2) facial angle; (3) mandibular unit length (MdUL); and (4) MLP model. MAIN OUTCOME VARIABLE: The resultant diagnoses: normal, prognathic, or retrognathic. COVARIATES: None. ANALYSES: A senior surgeon labeled the patients' mandibles as prognathic, normal, or retrognathic, creating a gold standard. Scientists at Rensselaer Polytechnic Institute developed an MLP model to diagnose mandibular prognathism and retrognathism using the 3D coordinates of 50 landmarks. The performance of the MLP model was compared with three traditional cephalometric measurements: (1) SNB, (2) facial angle, and (3) MdUL. The primary metric used to assess the performance was diagnostic accuracy. McNemar's exact test tested the difference between traditional cephalometric measurement and MLP. Cohen's Kappa measured inter-rater agreement between each method and the gold standard. RESULTS: The sample included 101 patients. The diagnostic accuracy of SNB, facial angle, MdUL, and MLP were 74.3, 74.3, 75.3, and 85.2%, respectively. McNemar's test shows that our MLP performs significantly better than the SNB (P = .027), facial angle (P = .019), and MdUL (P = .031). The agreement between the traditional cephalometric measurements and the surgeon's diagnosis was fair. In contrast, the agreement between the MLP and the surgeon was moderate. CONCLUSION AND RELEVANCE: The performance of the MLP is significantly better than that of the traditional cephalometric measurements.

Enhancing skeletal stability and Class III correction through active orthodontist engagement in virtual surgical planning: A voxel-based 3-dimensional analysis.

INTRODUCTION: Skeletal stability after bimaxillary surgical correction of Class III malocclusion was investigated through a qualitative and quantitative analysis of the maxilla and the distal and proximal mandibular segments using a 3-dimensional voxel-based superimposition among virtual surgical predictions performed by the orthodontist in close communication with the maxillofacial surgeon and 12-18 months postoperative outcomes. METHODS: A comprehensive secondary data analysis was conducted on deidentified preoperative (1 month before surgery [T1]) and 12-18 months postoperative (midterm [T2]) cone-beam computed tomography scans, along with virtual surgical planning (VSP) data obtained by Dolphin Imaging software. The sample for the study consisted of 17 patients (mean age, 24.8 ± 3.5 years). Using 3D Slicer software, automated tools based on deep-learning approaches were used for cone-beam computed tomography orientation, registration, bone segmentation, and landmark identification. Colormaps were generated for qualitative analysis, whereas linear and angular differences between the planned (T1-VSP) and observed (T1-T2) outcomes were calculated for quantitative assessments. Statistical analysis was conducted with a significance level of α = 0.05. RESULTS: The midterm surgical outcomes revealed a slight but significantly less maxillary advancement compared with the planned position (mean difference, 1.84 ± 1.50 mm; P = 0.004). The repositioning of the mandibular distal segment was stable, with insignificant differences in linear (T1-VSP, 1.01 ± 3.66 mm; T1-T2, 0.32 ± 4.17 mm) and angular (T1-VSP, 1.53° ± 1.60°; T1-T2, 1.54° ± 1.50°) displacements (P >0.05). The proximal segments exhibited lateral displacement within 1.5° for both the mandibular right and left ramus at T1-VSP and T1-T2 (P >0.05). CONCLUSIONS: The analysis of fully digital planned and surgically repositioned maxilla and mandible revealed excellent precision. In the midterm surgical outcomes of maxillary advancement, a minor deviation from the planned anterior movement was observed.

Does Articular Disc Position Change Following Mandibular Setback Surgery?

BACKGROUND: Maintaining condyle position following bilateral sagittal split ramus osteotomy (BSSO) is crucial to minimizing postoperative relapse. However, the impact of BSSO on the articular disc position remains inconclusive. PURPOSE: This study aimed to investigate the changes in articular disc position following setback BSSO surgery. STUDY DESIGN, SETTING, AND SAMPLING: In this prospective cohort study, subjects with mandibular prognathism requiring setback BSSO were enrolled between August 2021 and June 2022 at the Oral and Maxillofacial Surgery Clinic, Faculty of Dentistry, Chiang Mai University, Thailand. Patients with surgical complications, loss of follow-up, or significant artifacts in their MR images were excluded. PREDICTOR/EXPOSURE/INDEPENDENT VARIABLES: The predictor variable was time. The articular disc position was assessed at 3 time points, preoperatively (T0), 3 months postsurgery (T1), and 6 months postsurgery (T2). MAIN OUTCOME: The primary and secondary outcome variables were the changes in articular disc position between T0-T2 and T0-T1, respectively. Articular disc position was coded as normal, anterior disc displacement with reduction (ADDwR), anterior disc displacement without reduction (ADDwoR), and anterior disc displacement without reduction and degenerative joint disease (ADDwoR + DJD). COVARIATES: Covariate variables collected included age (years), sex (male or female), asymmetry (present or absent), surgical procedure (single jaw (BSSO) or bimaxillary surgery), and setback distance (millimeters). ANALYSES: Friedman's test with 80% power and a significance level of 0.05 was employed. Pairwise comparisons were performed using the Dunn-Bonferroni posthoc test to identify statistically significant differences. RESULTS: The study included 16 subjects, 6 females and 10 males, with a total of 32 TMJs. Subjects had a mean age of 23.75 (4.57) years. The proportion of TMJs with normal disc position postoperatively increased from 3 (9.4%) to 19 (59.4%). Statistically significant differences were found in the changes in disc position over time (P < .001). CONCLUSIONS: Following setback BSSO, the articular discs underwent changes, with a majority of ADDwR cases transitioning to a normal position. Cases with ADDwoR also demonstrated disc reduction capability after surgery. The combined orthodontic treatment and setback BSSO appear to have an effect on articular disc position in skeleton class III patients.

Three-dimensional bone remodelling of glenoid fossa in patients with skeletal Class III malocclusion after bimaxillary orthognathic surgery.

This study aimed to characterize three-dimensional quantitative morphological changes of glenoid fossa in patients with skeletal Class III malocclusion treated with bimaxillary orthognathic surgery. Ninety-five eligible patients (50 male, 45 female; mean age 22.09 years) were enrolled retrospectively. Cone beam computed tomography obtained at 1 week preoperatively (T0), immediately after surgery (T1), and at ≥ 12 months postoperatively (T2) were registered based on cranial base using voxel-based registration in 3D Slicer. Glenoid fossa surface was divided spatially into four regions, and bone modelling in these regions was visualized with color maps. Our data revealed that the mean surface variations of glenoid fossa were small, with modest bone formation as a whole. No significant associations between anteroposterior or vertical mandibular displacement and overall glenoid fossa remodeling were found (P > 0.05). Moreover, bone deposition was frequently observed in the anterior-lateral region of glenoid fossa in patients with a larger mandibular movement during T0-T1 (P < 0.001). Paired bone formation in the anterior-lateral region of glenoid fossa and bone resorption in the anterior-lateral region of condylar head was frequently observed. Collectively, our results revealed that glenoid fossa underwent complex but modest bone remodeling after bimaxillary surgery in skeletal Class III patients.

[Application of PAR index and cephalometrics for camouflage therapy and orthodontic-orthognathic surgery in adults with skeletal Class â ¢ malocclusion].

PURPOSE: To investigate the value of PAR index combined with cephalometry in evaluating the efficacy of mild to moderate skeletal Class Ⅲ malocclusion. METHODS: Sixty-five adult patients with skeletal Class Ⅲ malocclusion were selected and divided into group C (camouflage therapy) and group S (orthodontic-orthognathic surgery)according to different treatment methods. PAR index and cephalometric values before and after treatment in each group were compared, and then the differences of PAR index and cephalometric values before and after treatment between the two groups were compared. The clinical effect was evaluated by these indexes. SPSS 25.0 software package was used for data analysis. RESULTS: In PAR index, the tooth alignment, occlusion, overjet, overbite, midline, total score and weighted total score after treatment of both groups were all significantly lower than those before treatment(P＜0.001). The differences of left and right buccal bite and total posterior bite of group S before and after treatment was significantly larger than those of group C(P＜0.001). In cephalometric measurement, the differences of SNA, NA-PA, L1-NB, U1-L1, U1-SN and L1-MP in group C before and after treatment were significantly different(P＜0.05), while those in group S before and after treatment were SNA, SNB, ANB, NP-FH, NA-PA, L1-NB, U1-L1U1-SN and L1-MP(P＜0.001). The differences of SNB, ANB and NP-FH before and after treatment in group S were significantly greater than those in group C(P＜0.001). CONCLUSIONS: Both treatments are effective for adult patients with mild to moderate skeletal Class Ⅲ malocclusion. The effect of orthodontic-orthognathic treatment is better than camouflage therapy in occlusal relationship of posterior teeth, the position of mandible relative to cranium, the mutual position of upper jaw and lower jaw relative to cranium, and the degree of mandibular convexity. PAR index combined with cephalometric measurement can effectively judge the clinical effect of adult patients with mild to moderate skeletal Class Ⅲ malocclusion, which is a good evaluation method.

Comparison of three-dimensional soft tissue changes according to the split pattern after sagittal split osteotomy in patients with skeletal class III malocclusion.

OBJECTIVES: This study aimed to analyse the changes in soft tissue and hard tissue stability associated with the split pattern, i.e. long split (LS) or short split (SS), after sagittal split osteotomy. MATERIALS AND METHODS: Patients who underwent sagittal split ramus osteotomy were classified into LS or SS groups according to postoperative computed tomography images. They were examined via lateral cephalography and three-dimensional (3D) optical scanning before surgery (T0) and 1 (T1), 3 (T2), and 12 (T3) months after surgery. Six standard angles (SNA, SNB, ANB, FMA, FMIA, and IMPA) were used as measures of hard tissue change. The two sets of 3D data were superimposed, and the volumetric differences were calculated as the soft tissue change. The areas evaluated were delimited by 10 × 20-mm rectangles in the frontal aspect and a 25 × 25-mm square in the lateral aspect. RESULTS: A total of 42 sides (26 patients) were analysed, including 20 (16 patients) in the SS group and 22 (16 patients) in the LS group. We found no significant differences in cephalographic angle or soft tissue changes in the frontal aspect between the SS and LS groups. We found significant differences in the subauricular region from T0-T1 (p = 0.02), T0-T2 (p = 0.03), and T0-T3 (p = 0.037) in terms of soft tissue changes in the lateral aspect. The volume increase associated with posterior mandibular movement was greater in the LS group. CONCLUSIONS: We found that LS patients with mandibular prognathism exhibited increased subauricular volumes following mandibular setback. CLINICAL RELEVANCE: It is essential to predict the postoperative facial profile before surgery. The split pattern after sagittal split osteotomy affects the postoperative profile of patients with mandibular prognathism.

Effect of SEC III protocol on upper airway dimensions in growing class III patients: a retrospective study.

BACKGROUND: The primary objective of the study was to evaluate the effects of SEC III (Splints, Class III Elastics, and Chin cup) protocol on the upper airway dimensions using lateral cephalometric radiographs. The secondary objectives were to evaluate the skeletal and dental effects of the SEC III protocol using lateral cephalometric radiographs. METHODS: The pre- and post-treatment lateral cephalometric radiographs of 24 patients treated using the SEC III protocol were used to address the aim of the study. Children in the pre-pubertal (CS-1 or CS-2) or circumpubertal (CS-3 or CS-4) skeletal maturation stage and having class III dentoskeletal malocclusion were included in the study. Patients with a history of previous orthodontic treatment, maxillofacial surgery or trauma, tonsillectomy, adenoidectomy, or craniofacial malformations were excluded. The pre-treatment and post-treatment lateral cephalometric radiographs were traced, then airway measurements, skeletal measurements, and dental measurements were performed. The results were analysed using paired samples t-test or Wilcoxon signed rank test according to the data normality. RESULTS: Data of 6 males and 18 females were analysed (Mean age = 11.21 ± 1.02 years). Duration of active treatment was 5.75 ± 1.03 months. Treatment using SEC III protocol resulted in a significant increase in ANB angle (2.92 ± 1.50 degrees, p < 0.001) and Wits appraisal (3.31 ± 1.99 mm) (p < 0.001). The increase in the mandibular plane angle (0.75 ± 1.42 degrees, p = 0.02) and the maxillary length (2.29 ± 2.69 mm, p < 0.001) was statistically significant. Contrarily, the mandibular length did not change significantly (p = 0.10). The maxillary incisors were significantly proclined (4.38 ± 4.28 degrees; p < 0.001), while the mandibular incisors were significantly retroclined (-5.79 ± 6.21 degrees; p < 0.001) following treatment. The change in the nasopharyngeal airway and the retropalatal airway was not statistically significant. The middle and inferior pharyngeal space (retroglossal airway) significantly decreased by 1.33 ± 1.97 mm (p = 0.003) and 1.96 ± 2.48 mm (p = 0.001), respectively. CONCLUSIONS: Early class III correction using SEC III protocol reduced the retroglossal airway dimensions but did not affect the nasopharyngeal and retropalatal airway dimensions. Correction of the class III dentoskeletal relationship was obtained through both skeletal and dental changes.

Characterization of labiomandibular movements induced after isolated LeFort I osteotomy in the surgical management of class III malocclusion.

INTRODUCTION: Maxillary surgery alone can be proposed for the surgical management of class III malocclusion, but anticipating outcomes for the labiomental muscle complex is challenging due to the mandibular autorotation phenomenon. The objective of this study was to quantify the mandibular and labiomental movements induced by maxillary osteotomy alone in the management of class III malocclusion according to different clinical and surgical variables. METHODS: The post-operative changes in mandibular and labiomental shapes were studied by geometric morphometry from the pre- and post-operative lateral cephalometric radiograph of 25 patients. The explanatory variables tested were maxillary advancement, maxillary rotation, and divergence. RESULTS: Soft tissues repositioning are different from postoperative mandibular repositioning after maxillary osteotomy. Neuromuscular adjustments of mandible depend on divergence and the maxillary rotation. Labiomental response only depends on divergence. CONCLUSION: The surgical procedure does not have the same bone-related and musculocutaneous effects on patients with the same class III malocclusion. It is therefore essential for surgeons to understand the effects of their procedure on musculocutaneous tissues in order to best anticipate post-operative outcomes.

Evaluation of orthodontic habits regarding the use of miniplates in the correction of Skeletal Class III.

AIMS: To determine the habits of Orthodontists in the management of moderate skeletal class III patients by using miniplates, and to assess the relationship between the factors that may hinder the implementation of such treatment. MATERIAL AND METHODS: A questionnaire was carried out using the Google Form® platform, which included 18 questions relating to the seniority of the practice of the orthodontists, the preferential treatment, the difficulties encountered, the results obtained, and the frequency of a relapse. RESULTS: Experienced orthodontists (more than 10 years) treated skeletal class III malocclusion with the conventional facemask therapy, whereas orthodontists with less than 5 years of experience shifted to the miniplate technique which presented less dental effect and more skeletal correction with a decreased frequency of relapse. CONCLUSION: High financial cost and increased care load were considered the main obstacles regarding the placement of the titanium miniplates in treating skeletal class III patients.

Evaluation of the mandibular condyles trabecular structure in patients with severe class III pattern: a computed tomography (CT) fractal analysis study.

Class III malocclusion is a combination of dental and skeletal disorders that causes discrepancies in occlusion. Malocclusion can affect the structure of the Temporomandibular joint (TMJ) resulting in many problems, one of which is affecting the internal structure of the bone. This study aimed to examine the morphological features of class III patients' trabecular structure of the mandibular condyle in comparison with normal class I individuals using fractal analysis (FA). To study the internal structure of the mandibular condyle bone, Computed Tomography (CT) scans of 45 severe class III patients (age: 16-46) who were the candidates for orthognathic surgery were selected and matched by age and sex with 45 normal class I individuals. The trabecular bone structure of the left and right mandibular condyles in three CT planes of the study group and control group were evaluated employing the FA. The result of the present study indicated that the fractal dimensions (FD) values of class III patients were lower than those of the normal class I individuals in axial (class I: 1.31 ± 0.02, class III: 1.28 ± 0.02), sagittal (class I: 1.25 ± 0.03, class III: 1.19 ± 0.08), and coronal (class I: 1.5 ± 0.06, class III: 1.45 ± 0.07) planes (P < 0.001). There were no significant differences between the FD values of the males and females. The intra-group evaluation revealed that there was no correlation between age and FD values. No evidence of laterality was found regarding the FD values of the right and left condyles. Given the noticeable differences between the FD values, it can be implied that severe class III malocclusion may affect the trabecular pattern of the cancellous bone of the mandibular condyle compared to class I individuals. Therefore, due to the altered trabecular structure, clinicians should be cautious when planning treatments for these patients.

The prediction of sagittal chin point relapse following two-jaw surgery using machine learning.

The study aimed to identify critical factors associated with the surgical stability of pogonion (Pog) by applying machine learning (ML) to predict relapse following two-jaw orthognathic surgery (2 J-OGJ). The sample set comprised 227 patients (110 males and 117 females, 207 training and 20 test sets). Using lateral cephalograms taken at the initial evaluation (T0), pretreatment (T1), after (T2) 2 J-OGS, and post treatment (T3), 55 linear and angular skeletal and dental surgical movements (T2-T1) were measured. Six ML modes were utilized, including classification and regression trees (CART), conditional inference tree (CTREE), and random forest (RF). The training samples were classified into three groups; highly significant (HS) (≥ 4), significant (S) (≥ 2 and < 4), and insignificant (N), depending on Pog relapse. RF indicated that the most important variable that affected relapse rank prediction was ramus inclination (RI), CTREE and CART revealed that a clockwise rotation of more than 3.7 and 1.8 degrees of RI was a risk factor for HS and S groups, respectively. RF, CTREE, and CART were practical tools for predicting surgical stability. More than 1.8 degrees of CW rotation of the ramus during surgery would lead to significant Pog relapse.

[Clinical and radiographic effect of simultaneously labial and lingual augmented corticotomy: a prospective case series study].

Objective: To investigate soft-and hard-tissue changes after simultaneously labial and lingual augmented corticotomy in patients with insufficient alveolar bone thickness of lower anterior teeth both in labial and lingual side during orthodontic treatment. Methods: From January 2021 to June 2022, 10 patients [2 males and 8 females, (26.2±3.1) years old] who received orthodontic and orthognathic combined treatment from the Fourth Clinical Division, Peking University School and Hospital of Stomatology were selected. The alveolar bone thickness of lower anterior teeth both in labial and lingual side in these patients was less than 0.5 mm according to cone-beam CT examination before or during treatment, and 60 lower anterior teeth were included. The 10 patients were treated with simultaneously labial and lingual augmented corticotomy. The differences in gingival recession, papilla index and the differences in labial and lingual alveolar bone thickness of lower anterior teeth were compared. Results: Six months after surgery, the alveolar bone thicknesses at the 4 mm under cemento-enamel junction (CEJ), 8 mm under CEJ and at the apical level [labial side: (1.02±0.39), (2.22±0.89) and (4.87±1.35) mm; lingual side: (1.07±0.46), (2.31±1.04) and (3.91±1.29) mm] were significantly higher than that before surgery [labial side: (0.02±0.09), (0.06±0.21) and (2.71±1.33) mm]; lingual side: (0.14±0.29), (0.40±0.52) and (2.13±1.02) mm] (P<0.001), respectively. The increases in alveolar bone thickness of central incisors [apical level on labial side: (2.53±1.20) mm, 8 mm under CEJ on lingual side: (2.27±1.24) mm, apical level on lingual side: (2.66±1.49) mm] and lateral incisors [apical level on labial side: (2.42±1.30) mm, 8 mm under CEJ on lingual side: (2.28±0.92) mm, apical level on lingual side: (1.94±1.15) mm] were significantly higher than that of canines [apical level on labial side: (1.52±1.47) mm, 8 mm under CEJ on lingual side: (1.17±1.09) mm,apical level on lingual side: (0.74±1.37) mm] (P<0.01). There were no significant differences in the degree of gingival recession [labial side before surgery: (0.72±0.88) mm, lingual side before surgery: (0.80±1.09) mm; labial side 6 months after surgery: (0.72±0.81) mm,lingual side 6 months after surgery: (0.89±0.21) mm] and gingival papilla index [before surgery: 1.00(0.75, 2.00); 6 months after surgery: 1.00(1.00, 2.00) ] between pre-operation and 6 months after surgery (P>0.05). No serious complications occurred. Conclusions: The method used in this article for simultaneously labial and lingual augmented corticotomy was safe and feasible. This surgery has positive clinical significance for the stability of the periodontal tissue in orthodontic treatment for patients with alveolar bone thickness less than 0.5 mm of lower anterior teeth both in labial and lingual side.

Effect of Bimaxillary Orthognathic Surgery on Pharyngeal Airway Volume / Efecto de Cirugía Ortognática Bimaxilar en el Volumen de la Vía Aérea Faríngea

SUMMARY: Subjects with maxillary skeletal classes II and III not only express alterations in the hard and soft maxillofacial tissues, but also in the morphology and dimensions of the upper airway. A small space in the upper airway has been associated with sleep disorders, such as snoring and mainly obstructive sleep apnea/hypopnea syndrome (OSAHS). Consequently, interest has increased due to the influence of orthognathic surgery in the airway space. Although there are studies in the literature that have compared upper airway spaces, most have evaluated the changes using two-dimensional images, mainly lateral skull X-rays. The present study aimed to determine the airway volume in subjects with skeletal classes II and III who underwent bimaxillary orthognathic surgery. 80 CBCT exams from 40 subjects obtained before and 6 months after surgery were used. There were 20 class II and 20 class III subjects. For the volumetric analysis, a 3D rendering of the upper airway was made in previously established segments, and then the airway volume was calculated using the 3D Slicer® software version 4.11 (Slicer, USA). The statistical analysis by t-test of related samples revealed statistically significant volumetric increases in the nasopharynx, laryngopharynx, and total volume in class II patients. However, in class III patients, there were significant increases in the nasopharynx and total volume, while the volume was maintained in the oropharynx and laryngopharynx.

Sujetos con clases esqueletales II y III maxilares, no solamente expresan alteraciones en los tejidos duros y blandos maxilofaciales, sino también en la morfología y dimensiones de la vía aérea superior. Un espacio reducido a nivel de la vía aérea superior se asocia a trastornos del sueño como ronquidos y principalmente el síndrome de apnea/hipoapnea obstructiva del sueño (AOS); debido a esto, ha aumentado el interés por la influencia de la cirugía ortognática en el espacio de la vía aérea. Si bien existen en la literatura estudios que han comparado los espacios de la vía aérea superior, la mayoría de los estudios han evaluado los cambios utilizando imágenes bidimensionales, principalmente radiografías laterales de cráneo. El objetivo del presente estudio fue determinar el volumen de la vía aérea en sujetos con clases esqueletales II y III sometidos a cirugía ortognática bimaxilar. Se utilizaron 80 exámenes CBCT pertenecientes a 40 sujetos obtenidos previo a la cirugía y 6 meses después de realizada. Veinte sujetos clase II y 20 clase III. Para el análisis volumétrico se realizó un renderizado 3D de la vía área superior en segmentos previamente establecidos y posteriormente se calculó el volumen de dicha vía aérea con la utilización del software 3D Slicer ®versión 4.11 (Slicer, USA). El análisis estadístico realizado por t-test de muestras relacionadas, arrojó en pacientes clase II aumentos volumétricos estadísticamente significativos en nasofaringe, laringofaringe y volumen total. Mientras que en pacientes clase III, se observó aumentos significativos en Nasofaringe y volumen total y mantención de volumen en orofaringe y laringofaringe.

Does Clockwise Rotation of Maxillomandibular Complex Using Surgery-First Approach to Correct Mandibular Prognathism Improve Facial Appearance?

BACKGROUND: Facial aesthetics may be optimized based on a deeper understanding of soft tissue changes after orthognathic surgery. PURPOSE: The purpose of the study was to delineate facial soft tissue changes after clockwise rotation (CWR) of the maxillomandibular complex (MMC) to correct mandibular prognathism using the surgery-first approach. STUDY DESIGN, SETTING, SAMPLE: This prospective cohort study enrolled patients over 18 years of age with skeletal Class III malocclusion in the craniofacial center. The patients were excluded with previous history of craniofacial syndrome, orthognathic surgery trauma, infection at surgical sites, chin deviation (menton deviation ≥4 mm), 2 or more missing data points after surgery, or without informed consent. This study compared significant facial changes before (T0) and after orthodontic debonding (T1) in the CWR and control groups. PREDICTOR VARIABLE: The patients were divided in accordance with maxillary occlusal plane change (OPC) after surgery into CWR (OPC >4°) and control (OPC ≤4°) groups. MAIN OUTCOME VARIABLE: The primary outcome variable was frontal lip curvature (FLC: Right Cheilion-Stomion-Left Cheilion, degree) with or without upper lip curving upward at T1, where upper lip curving upward was considered more favorable. COVARIATES: The covariates included age, sex, and various cephalometric measurements. ANALYSES: The Mann-Whitney U test, paired, and independent t-test were implemented to compare the intragroup and intergroup differences. Statistical significance was indicated by P value <.05. RESULTS: The study comprised 34 patients (21 women) in the control group and 37 (29 women) in the CWR group; their mean ages were 23.64 ± 4.38 and 24.21 ± 3.84 years, respectively (P value = .562). At T1, the CWR group had significant increased FLC (P value = .001), alar width (P value = .034), and lower vermilion height (P value = .018), and decreased lower lip length (P value = .004). The high FLC group had significant decreased upper lip projection (P value = .002) and increased nasolabial angle (P value = .013). The significant relationship between CWR and high FLC was supported by the χ2 test (P value = .018) and multiple logistic regression (P value = .017). CONCLUSION: Greater CWR of the MMC increased FLC and lower vermilion height and reduced lower lip length. High FLC resulting from the CWR of the MMC improved facial appearance by moving the upper lip curve upward.